Ambica’s Hot Rolled Bar is the perfect solution
for all your forging, upsetting or re-rolling
applications.
-
These bars are fully “sound
centered”, as the macro etch examination is
carried out at the Billet stage to confirm the
internal soundness before subjecting to the
rolling.
-
Optimum reduction ratios are
maintained while hot rolling by selecting the most appropriate Billet size. This further
ensures complete breakage of “as cast structure”
and thereby promoting better internal soundness
in the rolled products.
-
Perfect identification and
traceability of the material is maintained at
all stages to ensure that there is no material
mix-up.
Round Bars
Size Range (Dia in millimeters)
25, 27, 28, 30, 32, 34, 36, 38, 40, 42, 44, 45, 47,
50, 53, 56, 58, 60, 63, 68, 70, 73, 80, 83, 85, 88,
90, 95, 100, 105, 115, 120 & 125 mm
Hot Rolled Billets / R.C.S / Hot Rolled Squares
Size Range
-
50 x 50 mm
-
55 x 55 mm
-
60 x 60 mm
-
63 x 63 mm
-
70 x 70 mm
-
75 x 75 mm
-
80 x 80 mm
-
90 x 90 mm
-
100 x 100 mm
Supply Conditions
-
Hot Rolled (Black) surface
-
Ultrasonically Okay
-
Spot Ground or Fully Ground
Surface – as per the requirement
-
Round Bars are also supplied in Straightened
Condition (2 mm per meter)
-
Heat Treated – Annealed, Solution Annealed,
Hardened, Oil Quenched, Tempered
-
Free of surface defects / Cracks
-
Cold Shearable & Cold Sawable
-
Smooth ends (without burrs) & No sharp edges>
-
Packed in Bundles of maximum 2.5 tons weight, with
weather-proof labeling
-
100% material identity tested thru Niton handheld
spectrometer
|
